Frameless Shower Screens Coburg

After final measurements are completed, manufacturing and installation is typically finished within 6 to 10 working days. If you are working to a tight renovation timeline, let us know early so we can plan the final measure as soon as the Coburg bathroom is ready.

Many frameless shower screens are made around 2000mm to 2100mm high, but the final height depends on the bathroom layout, ceiling height, shower head position, tile lines and the style of screen being installed.

Because our screens are custom made, the height can often be adjusted to better suit the finished bathroom rather than being limited to a standard pre-made size. For some layouts, a full height shower screen may also be considered.

Frameless shower screens require very little maintenance. Regular cleaning of the glass, along with occasional wiping of the seals and hardware, is usually enough to keep the screen looking good and operating properly.

If anything needs adjusting during the warranty period, we can come back out and sort it. Seals and silicone are considered consumable items, so they are not covered under warranty as they wear with normal use over time.

We use 10mm toughened safety glass for our frameless shower screens. This gives the screen a solid, stable feel while keeping the clean frameless appearance and meeting Australian safety requirements.

Compared with thinner glass used in many framed screens, 10mm glass feels more solid and helps reduce flex or rattling.

Yes. Frameless shower screens are generally easier to clean than framed screens because there are fewer edges and less aluminium for soap scum and grime to build up around.

Regular cleaning helps keep the glass looking clear and streak-free. A Nano coating can also be added as an optional upgrade to make everyday cleaning easier.

Final measurements should be taken after the wall tiles and floor tiles are completed. This ensures the glass is manufactured to the finished opening and fits properly with the correct clearances.

You can still contact us earlier with plans, photos or rough measurements so we can help guide the layout before the bathroom is ready for final measure. Measuring after tiling is important because even small changes to tile thickness, wall alignment or floor fall can affect how the glass fits.

Yes. A frameless shower screen can often be added to an existing bathroom without a full renovation, as long as the tiles, waterproofing and fixing points are suitable.

This is common when replacing an older framed shower screen or updating a bathroom that still functions well. We check the finished opening, wall condition, floor fall and available fixing points before recommending the best layout.

For smaller bathrooms, sliding shower screens and corner entry shower screens are often practical options because they do not need the same door swing space as a hinged door.

A sliding shower screen usually needs a minimum opening width of around 1200mm. If the space is smaller, a 3 panel semi-frameless slider may be used as an alternative.

Corner entry sliding shower screens are another good option for corner showers, helping maximise usable space while still keeping the area enclosed.

Generally, yes. We offer a wide range of hardware finishes to help match popular bathroom tapware and accessories.

Our finishes are selected to closely align with brands such as Meir, Nero and ABI Interiors, making it easier to achieve a consistent look across your bathroom.

Common finishes include chrome, matt black, brushed brass, brushed nickel and gunmetal, along with other specialty finishes. In most cases, we can get very close to your selected fittings.

Yes. We install custom frameless shower screens in Coburg and nearby northern suburbs including Brunswick, Pascoe Vale, Preston, Thornbury, Northcote and Reservoir.