Shower Screen
Replacements
Melbourne
Replace an old framed, leaking or outdated shower screen with a custom frameless glass screen measured and installed to suit your bathroom.
A cleaner way to update your bathroom
A shower screen replacement can make a bathroom feel cleaner, lighter and more modern without changing the whole room. We replace old framed and semi framed shower screens with custom frameless glass.
Every replacement is checked on site first. We look at the existing screen, wall conditions, floor fall, tile lines, fixing points and access before confirming what type of frameless screen will suit the space. Old framed screens can also hide issues worth knowing about before new glass goes in, and we flag anything that needs attention at the time of the check.
When should a shower screen be replaced?
Most replacements are not just about looks. Old screens can hide silicone issues, water damage, loose fixings or awkward layouts that no longer suit the bathroom.
Old framed screen
Older framed screens can make a bathroom feel darker and more closed in. A frameless screen opens the room up and lets the tile work show rather than being boxed in by aluminium framing.
Leaking or failed silicone
If water is escaping from the screen area, the cause needs to be checked before replacement. It may be the screen, the floor fall, old silicone or another issue.
Loose or damaged screen
Loose frames, worn hinges, broken rollers, cracked glass or corroded hardware are all signs that replacement may be safer than trying to keep repairing the old screen.
Bathroom refresh
A new frameless screen can be a straightforward upgrade when the tiles and layout are still in good condition. It is often the most visible improvement you can make to a bathroom without touching anything else in the room.
Caroline Springs shower screen replacement
The old framed screen in this Caroline Springs shower screen replacement was removed and replaced with a clean frameless glass enclosure. The result is lighter hardware, less visual clutter and a shower area that feels noticeably more open.
When we removed the existing screen, we flagged that the grout in the shower recess needed attention before the new glass went in. The timing worked well. While the glass was being manufactured, the client had the grout resealed and the shower was ready by the time we returned for installation.
It is a good example of why a replacement project often benefits from a proper measure visit rather than just swapping glass. Small things can be picked up early, before the new screen is installed.
Before
After
Sydenham low iron ensuite screen
This Sydenham ensuite had an older framed screen that had seen better days, with a squeaky door, dated hardware and a height that did not line up with anything else in the room.
The screen and mirror were both replaced and brought up to 2130 mm to align with the window height. Low iron glass was chosen for its cleaner, brighter finish against the lighter tiles, with less green tint through the glass edge and a noticeably clearer overall look.
Because the shower screen was custom made, the client also had the option of adding robe hooks through the side glass panel, keeping the towel hooks neat and built into the final layout.
Nano coating was applied before installation to make everyday cleaning easier.
Before
After
Templestowe chrome frameless screen
The existing screen in this Templestowe bathroom was replaced with a chrome frameless layout to match the existing tapware and accessories. It was a straightforward upgrade that did not require any changes to the rest of the room.
The glass was custom cut to extend the new screen up to the top of the tile line. This gave the replacement a more consistent look and helped the screen feel better matched to the bathroom.
Replacing the screen alone was enough to make the shower feel noticeably more open and less dated.
Before
After
Avondale Heights floor repair and new frameless screen
The original framed screen in this Avondale Heights ensuite had been installed incorrectly, and over time water had worked its way into the subfloor. The owner had no idea until a tile cracked underfoot.
Once the screen was removed, the extent of the damage became clear. The client arranged the subfloor repair, waterproofing and retiling before we returned to measure and install the new chrome frameless shower screen.
Before
After
What was found after the old screen came out
These extra photos show the hidden issue behind the replacement. The old screen was removed, the damaged area was exposed, then the client arranged the repair work before the new frameless glass was installed.
Old shower screen frames can trap a lot behind them
When an old framed shower screen comes off, what is underneath is not always pretty. Grime that has built up over time, trapped moisture and degraded silicone are common, especially around the base where the aluminium frame creates a ledge for water and soap residue to collect.
Sometimes it is only surface build up that cleans off easily. Other times the frame has been hiding failed silicone, loose tiles or water damage that needs to be addressed before new glass goes in. We flag anything that needs attention at the time of removal so it can be sorted before installation day.
Shower
Screen
Replacement
FAQs
These are common questions customers ask before replacing an old framed, leaking or outdated shower screen.
Can I replace just the shower screen without retiling?
If the existing tiles, waterproofing and shower base are still in good condition, the old screen can usually be removed and replaced without retiling the whole bathroom.
During removal and measure, we check the condition of the tiles, old silicone lines, fixing points and shower area so we can let you know if anything needs attention before the new glass is installed.
How do I know if my bathroom is suitable for a frameless replacement?
A frameless replacement depends on the opening size, wall condition, tile surface, floor fall and bathroom layout. Photos can help with an initial idea, but a site check gives the clearest answer.
If the bathroom is suitable, we can measure for a custom frameless screen. If something needs to be repaired first, we will flag it before the new glass is ordered.
What happens if damage is found under the old frame?
Old framed screens can sometimes hide failed silicone, trapped moisture, loose tiles or water damage. If we find something that needs attention during removal, we will let you know before the new shower screen is installed.
We handle the shower screen removal, measure and installation. If tiling, waterproofing, plumbing or floor repair is required, that work usually needs to be arranged with the right trade before the new glass goes in.
Do the existing fixing holes in the tiles cause a problem?
Existing fixing holes are common when replacing old framed or semi framed screens. In some cases they can be hidden by the new layout or sealed neatly. In other cases, they may remain visible depending on where the old frame was fixed.
We check the fixing points during the site measure or removal and let you know what is likely to be covered, sealed or still visible after the new screen is installed.
Will there be visible silicone lines where the old frame sat?
Sometimes, yes. Old frames can leave silicone marks, staining or slight colour differences on the tile surface.
Some marks can be cleaned back well, while others may still be faintly visible after removal. We will let you know if the old frame line is likely to affect the final finish.
Does the shower base need to be replaced at the same time?
If the shower base or tiled floor is sound, drains properly and is not leaking, it does not need to be replaced.
If there are cracked tiles, movement, soft flooring, poor fall or signs of water damage, we may be able to identify those issues during the site measure or removal. We will notify you if anything needs attention. Our work is limited to the shower screen replacement and minor touch ups around the screen area.
What if my existing tiles are old or crack easily?
Older ceramic tiles can be more fragile, especially around fixing points or where silicone and framing have been in place for a long time.
Full care is taken during removal, but the existing tile condition and the way the original screen was installed can affect the risk. If the tiles look brittle, loose or likely to need repair, we will let you know before proceeding.
How long does a shower screen replacement take from measure to install?
After final measurements are completed, manufacturing and installation is typically finished within 6 to 10 working days. Timing can vary depending on glass type, hardware finish and site conditions.
Is a replacement cheaper than a full bathroom renovation?
Replacing the shower screen is much cheaper than renovating the whole bathroom. It can make the room feel cleaner and more open without changing every surface.
It is not a substitute for a full renovation if there are waterproofing failures, rotten flooring or serious tile issues, but it can be a practical upgrade when the bathroom itself is still in good condition.
How is the old shower screen removed?
The process depends on the screen type. Old framed screens are usually unscrewed, separated from the wall and base, then carefully removed from the bathroom.
Once the screen is out, the area is cleaned and prepared for the new installation. This is also when old fixing holes, silicone marks, trapped grime or hidden water issues may become visible.
What happens to my old shower screen?
The old shower screen is taken away after removal. The glass and aluminium framing are separated so they can be recycled rather than treated as general waste.
If you prefer to remove the old screen yourself beforehand, that is fine. Simply separate the glass from the aluminium framing and leave it ready and we will take it away and dispose of it responsibly at no extra charge.
Do I need a plumber or tiler involved?
Not for a straightforward shower screen replacement. If the shower area is sound, we can remove the old screen, measure and install the new one without involving other trades.
A plumber, tiler or waterproofer may be needed if there are leaking issues, cracked tiles, failed waterproofing, loose flooring or repairs required before installation.
How long will the shower be out of use?
Whenever possible, we remove the existing shower screen first and measure for the new one with the area open. This helps avoid surprises and gives the clearest measurement.
If it is your only shower and you cannot be without it during manufacturing, we can usually measure with the existing screen still in place. In that case, the main downtime is usually around 24 hours after the new screen is installed, while the silicone cures.
What type of shower screen works best as a replacement?
The best replacement depends on the opening and bathroom layout. A hinged door shower screen works in many bathrooms. For smaller bathrooms, a sliding door may be more suitable.
The goal is to choose a screen that works with the existing space, rather than forcing in a layout that looks good but is not practical for everyday use.
Can I change the height of the new screen compared to the old one?
Yes. Since the glass is custom made, the new screen does not have to match the old height. It can often be made taller to better suit the tile height, window height, shower head position or overall bathroom layout.
In most cases, the new screen ends up taller than the original — older pre-made screens were often capped at 1800mm or 1850mm, while a custom frameless screen can be made to suit the actual finished bathroom rather than a standard box size.
Can I add a Nano coating to the new glass?
Yes. A Nano coating can be applied to the new glass after installation to help water, soap residue and mineral deposits sit on the surface rather than bonding to it, making the glass quicker to wipe down after use.
It is best applied to new glass before the shower has been used, which makes a replacement project a good opportunity to add it if you have been considering it.
What if the walls are not square or level?
This is common in replacement work, especially in older bathrooms. The glass is measured to suit the finished opening, including any out of square walls or slight variation in the tiles.
If the walls are too far out, we will explain what can and cannot be achieved before the glass is ordered.
Not sure if your old shower screen can be replaced?
Send through photos of the current screen, the shower base, wall tiles and any areas you are concerned about. We can usually give you a good idea of what is possible before arranging a site measure.
Get A QuoteRequest a Shower Screen Quote
Tell us a bit about your project, including approximate shower base dimension, desired height, whether it’s a newly renovated bathroom or shower screen replacement, hardware finish, site access, expected timing and any photos or plans if available.
